Mold Is a Water Issue: The 'Water Sports' That Load a Building With Moisture
Green Building Advisor's energy-auditing guest post names the real cause list: not a mystery spore, but occupant activities and building defects that add moisture faster than a tight modern house can shed it — vented-into-the-house fans and dryers, long showers, aquariums by the dozen, and materials that cannot buffer the excess.
Setting: homes and indoor air generally; the gym application is ours and is labelled as such. Source score: 8/10. This page is our original summary of a published building-science article. It is general information, not legal or medical advice.
Source: Green Building Advisor, “How to Avoid Mold” — guest post by Erik North, owner of Free Energy Maine and author of the Energy Auditing Blog, drawing on Joseph Lstiburek of Building Science Corporation for the wider history.
The diagnosis in one sentence
The article’s closing line is its whole argument, and it is the sentence this site’s moisture pages keep arriving at from other directions: mold in homes is a function of moisture and the capacity of a house to handle that moisture — so if you are having mold problems, look for the source of the moisture, and reducing the activities that add it reduces the mold. No product, spray, or test appears in the prescription. The water is the prescription.
‘Water sports’ — the load has a name
The author’s original audit instructor, he reports, called the moisture-adding activities and features ‘water sports’. His list, in three families:
- Inadvertent defects — a bathroom exhaust fan or a clothes dryer vented into the house instead of out of it: the building’s own equipment delivering its moisture load indoors, on schedule, every day.
- Integral features — a jacuzzi, a hot tub, or an indoor pool built into the enclosure: permanent open water inside the air barrier.
- Habits and hobbies — long showers, a great deal of cooking (boiling water), storing firewood indoors, owning lots of plants, keeping an aquarium.
The worked case makes the abstraction concrete. A recent audit customer called with condensation and mold appearing everywhere; opening the front door in winter fogged the storm-door glass within seconds, and the indoor relative humidity sat over 70%. The source took, in the author’s account, about three minutes to find: the household kept at least 15 aquariums, open saltwater and freshwater tanks throughout the house. Eliminating the source was not an option — the hobby was integral to the home’s life — so the agreed fix was architectural, not behavioral: one dedicated ‘fish room’ with its own ventilation and environmental controls. Contain the water sport; do not pretend it is not happening.
Why modern houses lose this fight faster
The article, citing Lstiburek’s account of the modern mold increase, adds the building-side half of the equation. Modern houses use processed materials — OSB and engineered I-joists — with a much lower capacity to absorb excess moisture than older solid wood, and those materials are, in its phrasing, easier for mold to eat. Modern houses are also tighter and require less heat, which limits drying potential. Set that beside the older comparison the article draws — a big, breezy farmhouse heated with cords of firewood, its furnace blasting the building dry — and the pattern completes: the load went up (more indoor water features, more bathing and cooking moisture retained) at the same time as the building’s ability to buffer and shed that load went down.
Read with the arithmetic in our earlier curation of Moisture Sources, Relative Humidity, and Mold — where under two pints of added vapor moves a small apartment from 50% to 70% RH — this article is the narrative half of the same table: the pints have names, and most of them are ordinary life plus one or two defects nobody fixed.
Why it matters here — the gym application, in our words
The article is about houses. A gym is a building whose entire business model is water sports: showers running in banks, a steam room making vapor on purpose, a hot tub and pool holding open warm water, and dozens of bodies respiring and perspiring at exertion rates no residence reaches. Against that load, the article’s two failure modes are precisely the ones our Gym Watch record keeps documenting — a wet room’s exhaust not actually exhausting (vented nowhere, failed, or never balanced), and materials with no capacity to buffer what the room produces between cleanings. The fish-room lesson transfers whole: the fix is never to tell members to sweat less. It is to give the wettest rooms their own ventilation and environmental controls, sized for the load the business itself creates — and to treat a fan vented into a cavity the way this article treats a dryer vented into a house: as the defect that explains the growth, not as background.
Tools for this job: Measure — moisture is the whole game
Pinless moisture meter
What it is: A handheld meter that reads moisture inside drywall, wood, and flooring through the surface — no pinholes, no damage. The tool that finds the wet wall behind the paint.
Why it is listed: Moisture readings are the hardest evidence to argue with. A dated photo of a meter reading on a wall turns a landlord dispute from opinion into documentation.
Its limits: Readings are relative and material-dependent — use them comparatively (wet spot vs. known-dry spot) and record both. A meter finds moisture, not mold.
Thermo-hygrometer / humidity data logger
What it is: A room thermometer-hygrometer; the logging kind records humidity over days and weeks instead of showing a single moment.
Why it is listed: A log beats a snapshot. Two weeks of humidity history above 60% is a document; a glance at a dial is an anecdote.
Its limits: Cheap sensors drift — sanity-check a new unit against a second one. Placement matters: measure where people live and sleep, not next to a shower door.
Some links in this strip are affiliate links and cost you nothing extra if you buy through one. As an Amazon Associate I earn from qualifying purchases. Affiliate money never buys scores, coverage, or silence — see our affiliate disclosure.
Read it at the source: Green Building Advisor — How to Avoid Mold.
If this happened to you
A wet room that fogs glass in seconds and never dries between uses is a moisture-load record waiting to be written down. File a report with dates, times, and what the room’s ventilation was visibly doing — the dated pattern is the evidence.
Not professional advice. This page summarizes one published article’s account for general information. Building-specific moisture design belongs to building professionals.