Stachybotrys chartarum: The Famous ‘Black Mold’ — and What the Agencies Actually Say
Stachybotrys chartarum is the greenish-black, slime-spored mold of a thousand headlines. Quebec's public health institute records what is established — a cellulose-eater needing near-saturation wetness (Aw 0.94 minimum), a trichothecene producer in the lab — and what is not: an unequivocal causal link to building illness, and any reported human infection at all.
Education only \u2014 not medical advice. Everything in the health section below is what the Institut national de sant\u00e9 publique du Qu\u00e9bec (INSPQ) and the US CDC publish about Stachybotrys chartarum, attributed to each agency. This page does not diagnose anyone. If you believe an exposure made you sick, see a doctor.
What it is
Stachybotrys chartarum \u2014 formerly S. atra \u2014 is the best-known species of a genus the INSPQ records at 87 named species in the International Mycological Association’s database. It is a greenish-black mold whose spores form in clusters covered with dried slime. The INSPQ distinguishes two chemotypes relevant to the toxin debate: chemotype S, which produces macrocyclic trichothecenes (the satratoxins and roridins), and chemotype A, which produces atranones and dolabellanes instead. Same name, different chemistry \u2014 one reason blanket claims about “the” toxicity of this species fail on contact with the fact sheet.
Where it grows
Worldwide, in soil and cellulose-rich material \u2014 hay, straw, grain, plant debris, dead roots, wood pulp, fabrics, paper \u2014 per the INSPQ. Indoors, it grows on high-cellulose, low-nitrogen building materials when they become water-damaged: ceiling tile, drywall and the paper facing of gypsum wallboard, wallpaper, insulation backing, cardboard, fiberboard, particleboard, jute, dust, and wood.
Its water requirement is the most demanding in this directory so far. The INSPQ states Stachybotrys requires water activity of at least 0.94 (optimum above 0.98) \u2014 near-saturation, sustained. Where most mold spores can germinate after 24 hours of wetness, the INSPQ states Stachybotrys spores require at least 48 hours of sustained wetness to germinate, in conditions lasting days or weeks. The INSPQ calls it, for exactly this reason, an excellent indicator of chronically water-damaged building materials. It grows slowly (2\u201340 \u00b0C, optimum 23\u201327 \u00b0C) and competes poorly, so a surface it finally dominates was wet, at lower levels, under faster colonizers first \u2014 see Penicillium, the early colonizer it follows.
Where people encounter it
In chronically wet buildings: flood-damaged homes, rentals with long-running leaks, wall cavities that never dried. The INSPQ’s sampling record carries a trap every tester should know: because the spores sit in slime and do not readily become airborne \u2014 they travel only when dry and disturbed, or riding on dust \u2014 air samples find it rarely (about 13% of dwellings and 5% of air samples in the studies the INSPQ cites), while wall-cavity air in one Houston study of 200 water-damaged houses was positive in 28% of cavity samples against 9.6% of room-air samples. A clean air test, in other words, is close to no evidence about this species. Direct swab and tape samples of the material itself are how it is actually found.
What the agencies publish about health effects
The following is the INSPQ’s published account, from its Stachybotrys chartarum fact sheet, with the CDC’s general mold framing stated separately where it appears:
- The famous claims are the unproven ones \u2014 and the INSPQ says so. It describes this species’ role in hemosiderosis and sick building syndrome as controversial, and states that while case-control studies, case reports, and experimental studies have suggested a possible association with environmental exposure to Stachybotrys mycotoxins, an unequivocal causal relationship has yet to be firmly established. It likewise records that neurotoxicity has been reported but conclusive evidence is still lacking, and that there is no evidence supporting claims of long-term cancer risk from this exposure.
- Allergy is real but secondary. The INSPQ records allergic reactions and infection as minor mechanisms for this species; some authors have associated rhinitis and asthma symptoms with its presence indoors, and one study found it at significantly higher concentrations in the homes of asthmatic subjects. No confirmed case of hypersensitivity pneumonitis due to Stachybotrys has been reported.
- Infection: none. The INSPQ states plainly that no human or animal infections due to Stachybotrys chartarum \u2014 or any Stachybotrys species \u2014 have been reported. Whatever this organism does, it does not do that.
- The CDC’s general framing (not species-specific) is at Mold \u2014 CDC: exposure to damp and moldy environments may cause a variety of health effects or none at all; for some people mold can cause a stuffy nose, sore throat, coughing or wheezing, burning eyes, or skin rash, with more severe reactions in people with asthma or mold allergy and lung infections in immune-compromised people. The CDC’s standing instruction is species-independent: you do not need to know the type of mold \u2014 remove it and fix the moisture problem.
Mycotoxins \u2014 the contested part, labeled
This is the species the phrase “toxic black mold” was built on, so the discipline of Mold Toxicity and Mycotoxins matters most here. What the INSPQ records: chemotype S strains produce satratoxins \u2014 trichothecenes, potent inhibitors of protein synthesis in laboratory and animal work; toxicosis (stachybotryotoxicosis) is documented historically in livestock and in farm workers handling contaminated hay and straw, with respiratory and skin irritation at the contact site; reported inhalation symptoms in building occupants range from congestion, cough, and rhinitis toward reactive airways disease. What it also records, in the same document: the step from those findings to “this species caused this building’s illnesses” is the step the literature has not firmly established. A swab that names Stachybotrys proves chronic wetness beyond argument. It does not measure a toxin, a dose, or a diagnosis \u2014 and on the agencies’ own account, nobody honest gets to skip from the first sentence to the last.
Found in gyms
- No Gym Watch location page currently names Stachybotrys chartarum from a location-specific test record. The Daytona founding case identified Aspergillus, Chaetomium, and Nigrospora \u2014 not this species \u2014 and this directory does not upgrade a famous name into a local record it does not have. When a sourced location record names it, it will be linked here.
How it is tested and documented
Sample the material, not the room air. Per the INSPQ’s dispersal account above, swab/tape lifts at visible growth and dust PCR are the informative routes; a single air sample systematically under-reports a slime-spored, cavity-dwelling species. Photograph the material wet and dry \u2014 growing colonies read black, shiny, and slimy when wet, powdery and sooty when dry. Field method: How to Test a Sauna.
Tools for this job: Test — find out what is actually there
GOT MOLD?
Fit score 10/10 — our research rating of how well this program fits this site's readers
What it is: A do-it-yourself mold test kit with the laboratory analysis included — the kit price covers the lab fees and free two-way shipping, per the program's own page.
Why it is listed: It is the exact purchase a reader of this site is already looking for: sample it yourself, mail it in, get a lab identification back. The all-in pricing matters — no surprise lab bill after the swab.
Its limits: Like every surface kit, it identifies what is present where you sampled. It does not count airborne spores, measure a dose, or prove that a room caused an illness.
My Mold Detective
Fit score 9/10 — our research rating of how well this program fits this site's readers
What it is: A recognised do-it-yourself mold test kit brand with lab analysis of your samples.
Why it is listed: An established name readers encounter everywhere in this space, with an easy sampling process a first-timer can follow — a reasonable starting point for a documented record.
Its limits: Same class limits as any consumer kit: presence and identification at the sampled spots, not air concentration, not causation.
EnviroBiomics — ERMI & HERTSMI-2
Fit score 10/10 — our research rating of how well this program fits this site's readers
What it is: Laboratory dust analysis by PCR. You collect a settled-dust sample and the lab reports mold species DNA: the ERMI panel, and the narrower HERTSMI-2 score built from five species associated with water-damaged buildings.
Why it is listed: This is the reference dust test that mold-literate readers ask for by name — the one that appears throughout the serious literature and community documentation on water-damaged buildings.
Its limits: Dust is history, not a live exposure reading: it says what has settled over time, not what you are breathing today. The EPA developed ERMI as a research tool and has not validated it for routine home decision-making — treat scores as one documented input, not a verdict.
The Dust Test
Fit score 9/10 — our research rating of how well this program fits this site's readers
What it is: Mail-in dust PCR analysis covering 36 mold species, with an explanation-friendly report format.
Why it is listed: A premium, content-friendly test: the species-level report gives a household (and any professional they hand it to) something concrete to work from.
Its limits: Same dust-history caveat as every PCR dust test — settled dust over time, not today's air. The program's stated audience is practitioners and wellness professionals.
Ulta Lab Tests — mold allergy panels
Fit score 7/10 — our research rating of how well this program fits this site's readers
What it is: Direct-to-consumer laboratory testing for people — including mold allergy panels — that you order yourself without a doctor's visit first.
Why it is listed: Listed separately and deliberately: everything above tests the *building*; this tests *you*. Readers who were told 'it's just allergies' can put an actual lab result next to that claim.
Its limits: This is medical testing, and this site gives no medical advice. A panel result is information to take to a clinician — ideally one experienced with environmental illness — not a diagnosis and not proof of where an exposure happened.
Some links in this strip are affiliate links and cost you nothing extra if you buy through one. As an Amazon Associate I earn from qualifying purchases. Affiliate money never buys scores, coverage, or silence — see our affiliate disclosure.
Sources
- INSPQ (Institut national de sant\u00e9 publique du Qu\u00e9bec), Stachybotrys chartarum \u2014 inspq.qc.ca/en/moulds/fact-sheets/stachybotrys-chartarum
- US CDC, Mold (basics, health effects, cleanup) \u2014 cdc.gov/mold-health/about
If this happened to you
Found mold in a gym, a rental, a school, or a workplace and nobody with authority would act? Put it on the record. A dated public report is the tripwire that, in most of the United States, does not otherwise exist.