AIHA's Plain-Language IAQ Guide: See Mold, Have a Mold Problem
The American Industrial Hygiene Association's consumer-facing Indoor Air Quality Resources page is the profession's own explainer — and its mold section is blunt: thousands of fungi, all capable of allergic symptoms in sensitized people; growth in damp areas above 60 percent humidity; a flooding event dried within 24 to 48 hours or it becomes a significant problem; visual inspection, not spore testing, as the usual way to identify a problem; porous materials removed, not cleaned; and, in the page's own words, do not attempt to use bleach to kill mold.
Setting: workplaces and homes — the industrial hygiene profession’s own public explainer; the gym application is ours and is labelled as such. Source score: 8/10. This page is our original summary of a published guidance resource. It is general information, not legal or medical advice.
Source: American Industrial Hygiene Association (AIHA), “Indoor Air Quality Resources” — the association’s consumer-facing IAQ guide (workplace explainer plus a home section produced for homeowners, landlords, and tenants), fetched in full for this page. It is the companion to this shelf’s curation of AIHA’s professional education index: that page mapped what the profession teaches its own; this one is what the profession tells the public.
The mold section, in the association’s own positions
The guide’s “Fungi and Mold” section is short, and every sentence in it is a position a building operator can be held to:
- The allergy frame. “There are thousands of types of fungi and molds and all of them are capable of causing allergic symptoms in sensitized persons. Many people are allergic to fungi and some types can cause disease or release toxins.” That is AIHA’s published framing — attributed here to AIHA, and notably broader than the “it’s just cosmetic” dismissal members of this site’s gyms report hearing.
- Where it grows. Fungi are “most likely to be found in damp areas of your home or with high humidity (greater than 60 percent)” — the guide names improper drainage, porous foundation materials, improperly maintained humidifiers, dehumidifiers, and air conditioners, and leaks from roofs, plumbing, and windows as common causes.
- The flood clock. “A single flooding event can create a significant mold problem unless it is immediately dried out within 24 to 48 hours.” The same 24-to-48-hour window appears across this shelf’s agency curations (NIOSH’s action steps state the same doctrine) — here it is the industrial hygienists’ own public version, and it is a clock, not a suggestion: do not allow water to form pools or wet spots, clean or remove surfaces where molds have grown before, and empty and clean the water-collection pans of refrigerators, dehumidifiers, and air conditioners frequently — humidifier reservoirs, the guide warns, can themselves contaminate indoor air with mold or bacteria and should be cleaned thoroughly at least once a week.
- See it, and you have it. “Testing for airborne mold spores is not usually necessary in order to identify a mold problem. Most mold problems can be identified by conducting a visual inspection; testing for moisture content is also helpful… If you can see mold then you have a mold problem, although many times the mold growth is hidden inside wall or ceiling cavities and the full extent of damage may not be apparent until mold remediation is performed.” The sampling doctrine of the profession that sells sampling, printed on its public page: eyes and a moisture meter first.
- The ten-square-foot line and the materials rule. Small amounts (less than ten square feet) the occupant can address; nonporous surfaces (glass, metal, plastic, ceramic tile) can be cleaned with ordinary soap and water; porous surfaces — gypsum wallboard, carpeting, insulation — “cannot be cleaned and must be physically removed and discarded following industry guidelines for mold remediation while wearing appropriate protective equipment.” And the sentence this page’s title keeps: “Do not attempt to use bleach to kill mold.” Above ten square feet, the guide’s direction is a professional mold contractor.
- After a flood. Clean and sanitise water-damaged furnishings and materials as soon as possible; discard anything you cannot clean and dry — “since even dry spores can continue to cause allergic symptoms.” Dry is not the same as gone, in the association’s own words.
The complaint protocol — the guide’s other half
The mold section sits inside a full investigation method, and its discipline is the part gym members can use verbatim. Occupant concerns “should be taken seriously and responded to quickly,” and the guide’s first step is a structured interview: what are the specific complaints, where in the building, when does the problem occur and when did it first occur, who is affected and is it isolated or widespread, what health effects, do the effects cease soon after leaving the building, and has the building engineer or HVAC contractor evaluated the area and with what conclusions. Then a walk-through to find sources, then timely communication back to occupants about what is being done and what was found. Elsewhere the guide adds the microbial sentence that governs wet buildings: “Dusty surfaces, stagnant water, and damp materials provide a favorable environment for microbial growth,” and notes that one potential but rare infection from such growth is Legionella — the organism behind most of this site’s documented gym closures, named here in the profession’s general guide at its true rarity. It also tells readers when to bring in an industrial hygienist — professionals who “investigate mold from excessive humidity and water intrusion and Legionella” among their listed work — and how to vet one: a consultant who “proposes elaborate and expensive air monitoring without demonstrating to your satisfaction that the resulting data will be meaningful” is one to look elsewhere than hire. The housekeeping section closes the loop for carpeted rooms: dust mites and molds thrive above 60 percent humidity, vacuuming should use HEPA filtration or a central system exhausting outside, and a steam-cleaned carpet must be dried within 24 to 48 hours or the wet carpet may support the growth of microorganisms — the flood clock again, applied to the cleaning itself.
Why it matters here — the gym application, in our words
A gym is the guide’s damp-area list under one roof: showers and steam rooms run above 60 percent humidity by design, humidifiers and air conditioners carry reservoirs and collection pans, locker-room carpet and matting are porous, and every leak is a flooding event in miniature. Read against the guide, the standard member experience documented across this site fails at named points: the visible growth waved off (the guide: if you can see mold then you have a mold problem), the demand that a member first pay for spore testing (the guide: testing is not usually necessary to identify a problem; visual inspection and moisture testing are the method), the bleach-and-paint response (the guide: do not attempt to use bleach, and porous material is removed, not cleaned), and the wet carpet or mat left to dry on its own schedule (the guide: 24 to 48 hours, or it grows). None of that is this site’s standard. It is the published standard of the association whose members investigate buildings — which is why this curation exists: so a member can walk into the conversation carrying the profession’s own page, not ours.
Tools for this job: Measure — moisture is the whole game
Pinless moisture meter
What it is: A handheld meter that reads moisture inside drywall, wood, and flooring through the surface — no pinholes, no damage. The tool that finds the wet wall behind the paint.
Why it is listed: Moisture readings are the hardest evidence to argue with. A dated photo of a meter reading on a wall turns a landlord dispute from opinion into documentation.
Its limits: Readings are relative and material-dependent — use them comparatively (wet spot vs. known-dry spot) and record both. A meter finds moisture, not mold.
Thermo-hygrometer / humidity data logger
What it is: A room thermometer-hygrometer; the logging kind records humidity over days and weeks instead of showing a single moment.
Why it is listed: A log beats a snapshot. Two weeks of humidity history above 60% is a document; a glance at a dial is an anecdote.
Its limits: Cheap sensors drift — sanity-check a new unit against a second one. Placement matters: measure where people live and sleep, not next to a shower door.
Some links in this strip are affiliate links and cost you nothing extra if you buy through one. As an Amazon Associate I earn from qualifying purchases. Affiliate money never buys scores, coverage, or silence — see our affiliate disclosure.
Read it at the source: AIHA — Indoor Air Quality Resources.
If this happened to you
Shown visible growth and told it was nothing, or told to come back with a lab report before anyone would look? File a report with the dates and the response you were given: the profession’s own guidance above is the yardstick, and a dated report is how a response gets measured against it.
Not professional advice. This page summarizes one published guidance resource for general information. Building-specific assessment belongs to qualified professionals.